Machines and Accessories for Water Damage Restoration - CEBE Reinigungschemie GmbH

Go to content

Main menu:

Machines and Accessories for Water Damage Restoration

Products > Machines and Accessories
Benovac FE - Extraktionsmaschine für Wände und Hartböden von der CEBE Reinigungschemie GmbH
Benovac FE
The new CEBE® BENOVAC FE, with auto feed function as well as automatic discharge makes it ideal for use in water damage restoration, hard floor, and façade cleaning. The hard floor tool as well as the wall tool make it possible to clean with up to 80 bars of pressure while at the same time removing the cleaning solution - from vertical surfaces too. This enables the user to clean façades with a minimum of waste water and makes the construction of water capturing devices unnecessary. Both automatic feed and discharge enable one to clean large surface areas without the tedious carrying of water and waste water.

Technical Data
Dimensions: 71,1cm x 45 cm x 96,5 cm
Weight: 67 Kg
Vacuum: 2 x 2-stage (each 1020 W)
Pump: adjustable up to 80 Bar (1476 W)
Power (Circuit 1): 2124 W
Power (Circuit 2): 1956 W
Water Lift (closed): 3454 mm
Automatic Water Supply: at least  5/8” connection
Automatic Discharge: up to 94.6 litres per minute (600 W)
Waste water tank: 56.7 litres
Noise level: < 68 db(A)


Packaging: Piece Art. 230000
Bodendapter für die Benovac FE von der CEBE Reinigungschemie GmbH
Floor Tool for Benovac FE

The Floor Tool and the Wall Tool both work based on the same principle: water is pushed through two jets which are angled  with high pressure. This creates a rotational movement which add centrifugal mechanical action to the water pressure. This not only leads to more surface area being cleaned but the cleaning process also being more intensive. This strong mechanical action allows many surfaces to be cleaned with water alone. Whether fine stone ware or natural stone floors - even the grout is cleaned deeply without damaging it - the advantage of the rotational action.

Diameter: 32 cm
Distance between the two jets: 25 cm

Packaging: Piece Art. 231000
Wandadapter für die Benovac FE von der CEBE Reinigungschemie GmbH
Wandadapter von unten für die Benovac FE von der CEBE Reinigungschemie GmbH
Wall Tool for Benovac FE

The wall tool is equipped with a rubber lip that makes it possible to clean vertical surfaces, rinse them and vacuum the wastewater without having to use a seperate recovery construction.

Diameter: 22 cm
Distance between jets: 15 cm

Packaging: Piece Art. 232000
Hydroxyl Generator Titan 1000 - Geruchsneutralisator von der CEBE Reinigungschemie GmbH
Hydroxyl Generator Titan 4000 - Geruchsneutralisator von der CEBE Reinigungschemie GmbH
Hxdroxyl Generators

TITAN 1000

Technical Information

Voltage:    220 Volts, 50/60 Hz
Power:   220 Watt
Air movement:   2.70 m3/min.
Max. treatment volume:  270 m3
Dimensions (H x W x D):  15 x 22,5 x 30 cm
Weight:   3.6 Kg
Filter:    10 x 10 cm

Packaging: Piece Art. Nr. 157000

TITAN 4000

Technical Information

Voltage:    220 Volt, 50/60 Hz
Power:   880 Watt
Air movement:  135 m3/min.
Max. treatment volume:  1,080 m3
Dimensions (H x W x D):  66 x 66 x 30 cm
Weight:    17.3 Kg
Filter (electrostatic):  50 x 50 x 1,25 cm, 82% efficiency

Packaging: Art. Nr. 155000
Hydroxyl Maximierer dür den Hydroxyl Generator Titan 4000 Geruchsneutralisator von der CEBE Reinigungschemie GmbH
Hydroxyl Maximizer

The hydroxyl generator technology requires water above all in order to generate hydroxyl radicals. This means that the higher the relative humidity the greater the amount of hydroxyl radicals generated. In order to support this process, especially in situations where relative humidity is low, we have the Hydroxyl Maximizer. It uses ultrasound technology to create a very fine, cold, water vapor. The Hydroxyl Maximizer is placed directly behind the TITAN 4000. This increases the influx of humidity and therefore the amount of hydroxyl radicals generated. The Hydroxyl Maximizer is included with the Titan 4000.
CEBEzon 100 - Ozongenerator für die Geruchsneutralisation von der CEBE Reinigungschemie GmbH
CEBEzon 500 - CEBEzon 600 - Ozongeneratoren für die Geruchsneutralisation von der CEBE Reinigungschemie GmbH
Ozone Generators - CEBEzon

Odour neutralization/control with ozone.

Ozone is used for the oxidative odour neutralization of organic compounds. We offer four sizes:

Art. 122000: CEBEzon 100 – 0.1 g Ozone/hr
Art. 123000: CEBEzon 500 – 0.5 g Ozone/hr  
Art. 124000: CEBEzon 3000 – 3.0 g Ozone/hr      
Art. 124500: CEBEzon 6000 – 6.0 g Ozone/hr    

The size of the generator to be used is dependent on room size, odour intensity, and the type of odour to be neutralized.
Sonozaire® Ozongeneratoren für die Geruchsneutralisation von der CEBE Reinigungschemie GmbH
Ozone Generators - Sonozaire®

Odour neutralization/control with ozone.

Ozone is used for the oxidative odour neutralization of organic compounds. We offer three sizes:

Art. 115000: 115 A – 2.0 g Ozone/hr
Art. 125000: 330 A – 5.0 g Ozone/hr    
Art. 129000: 630 A – 10.0 g Ozone/hr
The size of the generator to be used is dependent on room size, odour intensity, and the type of odour to be neutralized.
Turbo Trockner für die schnelle Trocknung von der CEBE Reinigungschemie GmbH
Turbo Dryer

The Turbo Dryer is an irreplaceable tool for the carpet and upholstery cleaner. Fast drying prevents browning and bleeding of colours.

Technical Information:
Motor: 4.7 amp, 3 stages
Air flow max.: 3,180 m3/hour
Voltage: 230 V, 50/60 Hz
Dimensions: 46 x 41 x 46 cm
Weight: 12.5 kg

Packaging: Piece Art. 47012
Adapter für den Turbo Trockner von der CEBE Reinigungschemie GmbH
Adapter for Turbo Dryer

To have the ability to give the air flow up to 3 directions.


Packaging: Piece Art. 47500
Ventilator für Luftbewegung und Trcknung von der CEBE Reinigungschemie GmbH
Electric Fan

Supportive air movement during ozone treatment or drying. An ideal supplement when uncomplicated movement of air is required. A highly effective but silent electric fan which accelerates odour neutralization with ozone but also the drying process with rugs, for example. This fan may be tilted between a 90 and 180° position.

Air Flow: 170 m3/min.
Speed: 1.350 RPM
Diameter: 50 cm
Voltage: 230 V
Power: 180 W
Dimensions: 58 x 22 x 63 cm
Cable Length: 5 m
Weight: 7 kg

Packaging: Piece Art. 47400
Heissvernebler (Thermischer oder Trocken Vernebler) für die Geruchsneutralisation von der CEBE Reinigungschemie GmbH
Fogger, Hot/Dry TM-1500B

Thermal fogging of suitable liquids. An electrically powered thermal fogger. It operates virtually noiselessly, is very powerful and may be activated by remote control. It is easy to handle and easy to maintain. For cleaning the machine we recommend our product Thermo Clean.

Voltage: 220-250V AC, 50/60 Hz
Power: 2000 Watt
Tank volume: 2.5 litres
Fog reach: 15 m
Output: 300 m3/min.
Particle Size: 0,5 - 25 µm
Weight: 15 Kg

Packaging: Piece Art. 133500
Kaltvernebler (Mechanischer Vernebler oder Nass Vernebler) für die Geruchsneutralisation von der CEBE Reinigungschemie GmbH
Fogger, Cold/Wet

Mechanical fogging of suitable liquids. For fogging water- and oil-based products. May use up to 36 litres of liquid per hour.

Particle size: 5 - 50 µm
Fog production: 0 -  36 litres/hour
Tank volume: 6 litres Power: 800 W
Weight: 4.2 kg

Packaging: Piece Art. 132500

Home | About Us | Products | Catalog | News | Service | Downloads | Contact | Imprint | Privacy Notice | General Site Map
Back to content | Back to main menu