Façade Cleaning and Grafiti Removal - CEBE Reinigungschemie GmbH

Go to content

Main menu:

Façade Cleaning and Grafiti Removal

Products
Elox and Aluminium Cleaner - Façade cleaner from CEBE Reinigungschemie GmbH
Elox and Aluminium Cleaner
Neutral cleaner for elox and aluminium surfaces with care effect. This product was developed for cleaning anodized aluminium (elox) and aluminium. It is more user- and environmentally friendly due to its water-based formulation. The fine abrasive particles contained in the product ensure thorough but mild cleaning results. After cleaning, a very fine film remains behind which protects the surface from resoiling temporarily.

Contents: <5% aliphatic hydrocarbons, <5% nonionic surfactants, paraffin oil, organic solvents, conservation agent, and water.

pH: Concentrate: 9.5 - 10.5 Ready-to-use-solution: not applicable

Dilution: Apply undiluted.

Packaging: Box of 4 x 5L Art. 700005

Application methods:






GRAFO-F - Liquid graffiti remover from CEBE Reinigungschemie GmbH
GRAFO - F
GRAFO - F is a liquid graffiti remover for a large number of surfaces inside and outside.

It removes spray paints, felt-tip pen and ball-point from smooth surfaces and is ideal as a pre-spray for porous surfaces when applying GRAFO-G afterwards. The product is easily rinsed off with water and biologically degradable. Its composition allows for its use under 0°C.

Contents: 5-15% nonionic surfactants, 15-30% aliphatic hydrocarbons, perfume (d-limonene), and organic solvents.

pH: Concentrate: not applicable Ready-to-use-solution: not applicable

Dilution: Apply undiluted.

Packaging: Box of 12 x 1L Art. 96551, Box of 4 x 5L Art. 96505

Application methods:






GRAFO-G - Graffiti remover in gel form from CEBE Reinigungschemie GmbH
GRAFO - G
GRAFO - G is a graffiti remover in gel form for a large number of surfaces outside.

It removes spray paints, felt-tip pen and ball-point from smooth and porous surfaces. The product is easily rinsed off with water and biologically degradable. Its composition allows for its use under 0°C.

Contents: 15-30% nonionic surfactants, 15-30% aliphatic hydrocarbons, perfume (d-limonene), organic solvents, and rheological additive.

pH: Concentrate: not applicable Ready-to-use-solution: not applicable

Dilution: Apply undiluted.

Packaging: Box of 12 x 1L Art. 96651, Box of 4 x 5L Art. 96605

Application methods:






GRAFO-P - Liquid graffiti remover from CEBE Reinigungschemie GmbH
GRAFO - P
GRAFO - P is a mild, liquid graffiti remover for smooth and sensitive surfaces inside and outside.

GRAFO – P is especially suited for plastics and plexiglass as well as painted surfaces due to its mild formulation. It may also be used successfully on carpets that have been stained using felt-tip or spray paint.

Contents: <5% nonionic surfactants and organic solvents.

pH: Concentrate: not applicable Ready-to-use-solution: not applicable

Dilution: Apply undiluted.

Packaging: Box of 12 x 0,5L Art. 96751, Box of 4 x 5L Art. 96705

Application methods:






Hurricane-A - Highly alkaline façade cleaner from CEBE Reinigungschemie GmbH
Hurricane - A
Highly alkaline façade cleaner.

This product may be used in any method and removes even extreme dirt caused by pollution and other environmental influences. It may also be used as a shadow remover (residue remover) in graffiti removal. The high alkalinity neutralizes typical environmental contaminations and binds them in the rinse water.

Contents: <5% anionic surfactants, <5% NTA, 5-15% EDTA, perfume (lillial, amylcinnamal), complexing agents, sodium hydroxide, dye, and water.

pH: Concentrate: 12.5 - 13.5 Ready-to-use-solution: 11.5 - 13.0

Dilution: Dilute 1:1 to 1:50 with water and apply.

Packaging: Box of 4 x 5L Art. 530005

Application methods:






Hurricane-S - Highly acidic façade cleaner from CEBE Reinigungschemie GmbH
Hurricane - S
Highly acidic façade cleaner.

A concentrated strongly acidic cleaner for façades made of face brick as well as all acid resistant and silicate-bound natural and synthetic stones, sandstone, clinker brick, ceramic surfaces, as well as glazed tiles. Hurricane – S dissolves atmospheric soil, grease, fat, oil, wax, tough residues from organic and inorganic matter, moss, algae, fungus, and sponge plaque.

Contents: <5% nonionic surfactants, inorganic acid, fluoride salt, and water.

pH: Concentrate: 0.5 - 1.5 Ready-to-use-solution: 1.8 - 2.2

Dilution: Depending on the degree of contamination dilute 1:1 to 1:20 with water.

Packaging: Box of 4 x 5L Art. 531005

Application methods:






Home | About Us | Products | Catalog | News | Service | Downloads | Contact | Imprint | Privacy Notice | General Site Map
Back to content | Back to main menu